| Miure Duo Quick Start | ||
|---|---|---|
| Prev | ||
Further configuration should be based on analysis of the 5GHz radio band usage at device installation points and at the whole link distance.
Using the "Radio parameters" tab configuration should be chosen in such a way, that while the "Continuous transmission" option is on, the real radio throughput (yellow color) on the "MRTP statistics" graph attains highest values.
During remote configuration phase we RECOMMEND using the "Ping watchdog" option of the "Advanced" tab - devices should ping each other and the administrator should use only the "Apply" button. Should the configuration under test fail, device will automatically recover to the last (working) saved option set after some time (usually about 2 minutes). After finishing the configuration phase one should remember to click "Save".
A few hints:
in some cases, exchanging link sides (A<->B) and frequencies (main<->secondary) can increase the link performance
the real throughput for bigger channel widths is not always greater than for smaller widths - specifically, e.g. unstable operation with 20MHz channel width may practically mean the overall performance to be lower than while using stable 10MHz-wide connection
for ETSI conformance the option "Maximum transmit power" should be set in such a way that after summing the value with antenna gain for selected frequency it should not exceed 30dBm (devices have automatic transmit power control which is limited from above by this option)
for maximum performance we recommend using "Continuous transmission" and "Short inter-frame spaces"
we do NOT recommend turning off automatic control of modulation, transmit power and frame size