Miure OEM is an electronic module used in Miure radio links, available in two versions: Mono and Duo.

Works in radio frequency range of 4.9GHz to 6.1GHz under control of the MRTP protocol either using one radio channel - Mono version - or two radio channels - Duo version.

In both versions, thanks to application of specially designed technology, Miure OEM attains higher performance values compared to competing products. In single channel mode, MRTP implements Time-Division Duplex (TDD) in order to precisely control transmission between two link sides. In case of two channels, MRTP assigns first radio exclusively for transmission and second exclusively for reception, thus eliminating the need for carrier multiaccess and achieving maximum possible performance.

Miure OEM is an ideal solution for radio networks. Electronic module dimensions are just 6 x 10 cm, what makes it easy to mount in readily available 5GHz antenna + enclosure kits.

Either one or two high-power radio modules can be used with Miure OEM. Operating frequency can be chosen with 5MHz step in range from 4.9GHz to 6.1GHz, with channel widths of 5, 10, 20 and 40MHz.

Performance

• effective aggregated TCP/IP bandwidth for 40MHz-wide channel:
  • Mono - one radio: up to 90 Mbps
  • Duo - two radios: up to 150 Mbps
• range: up to 50 km
• packet performance: over 60 000 pps

Features

• innovative radio transmission protocol: MRTP
  • no bandwidth degradation with distance increase (Duo)
  • radio bandwidth is the bandwidth available "on interface"
  • concurrent frame fragmentation and aggregation
  • asynchronous retransmission
  • automatic selection of modulation, frame size and transmit power
  • modes of minimal latency and strict ordering of Ethernet frames
  • AES-CCMP encryption with automatic key negotiation
• can be used with any dual polarized antenna with port-to-port isolation min. 40 dB (Duo)
• operation in IEEE 802.3 (Ethernet) bridge mode
  • STP protocol support (IEEE 802.1D)
  • fully transparent, especially to VLAN traffic (IEEE 802.1Q)
  • Ethernet frame filter
    • support for ARP, DHCP, SMB and PPPoE protocols
    • support for destination MAC address translation (MAC DNAT)
  • QoS support
• simple usage and installation
  • PoE (Power over Ethernet) support (IEEE 802.3af)
  • automatic radio parameters selection
  • small dimensions and low weight
  • advanced, multilingual web interface
  • interactive, real-time graphical statistics of the device
  • multilingual, simple command line interface accessible via SSH protocol
  • SNMP diagnosis
• device warranty: 12 months