All devices

1. What is the default IP address and login/password?

   The default IP address is 192.168.1.1 and login/password to WWW and SSH interfaces is admin/admin.

2. What is the maximum length of the PoE cable?

   Maximum length is 50 meters.

3. How to restore the default configuration?

   Use the procedure of configuration reset.

Miure Duo

1. What should be the frequency separation between both radios?

   Generally, the more the better. Minimal separation is >2 x channel width.

2. Device disconnected from the network reboots each 1 minute. What is the reason?

   This is expected behavior due to internal interface check. The "Ethernet" port of the power supply should be connected to a network device, like hub, switch, router, laptop, etc.

3. Is Miure Duo capable of transmitting VLAN tagged frames?

   Yes, the device is completely transparent to Ethernet traffic.

4. How the antenna polarization is chosen in Miure Duo 5?
   • side A: TX: f1 on V, RX: f2 on H
   • side B: TX: f2 on H, RX: f1 on V

   TX - transmitter, RX - receiver, V - vertical polarization, H - horizontal polarization, f1 - main frequency (freq), f2 - secondary frequency (freq2)

5. How to query the device using SNMP?

   First, remember that Miure Duo uses SNMP version 1, so it may not respond to queries in versions "2c" and/or 3. Second, it is recommended not to limit access to the SNMP agent during tests (the snmpsrc option).

   Exemplary query using the snmpwalk tool of the popular Net-SNMP project:

   snmpwalk -v 1 -c public 192.168.1.1

   Having the Miure Duo MIB definition on hard disk (ASN-DUO-MIB.txt) we may use it to get information on radio parameters:

   snmpwalk -v 1 -c public 192.168.1.1 -m ASN-DUO-MIB.txt miureDuo